SearchMenu

Coloured pencil techniques for beginners: seven to try on colouring pages

The seven coloured pencil techniques most worth learning first are: controlling pressure, layering from light to dark, hatching, flat shading for smooth gradients, blending with a lighter pencil or a blender, burnishing as the very last layer, and keeping edges crisp. You need nothing more than a set of coloured pencils (colored pencils, in the US), a sharpener and a printed page. The quickest way to learn them is on a page made of simple shapes, such as a geometric pattern or a stained glass window, where every tile or pane is a ready-made practice square.

Free by email: 10 mandala, stained-glass and geometric pages in one printer-ready PDF. Get the mandala sampler

The seven techniques at a glance

Seven coloured pencil techniques and where to use them
TechniqueWhat you doGood for
Pressure controlPress lightly for pale colour, harder for strong colourEvery page; the base of everything else
LayeringBuild several light layers, lightest colour firstRich, even colour in large spaces
Hatching and cross-hatchingParallel lines, then lines at another angleTexture, shadows, feathers, wood
Flat shadingHold the pencil low and use the side of the leadSmooth gradients in skies and petals
BlendingGo over two colours with a lighter pencil or a colourless blenderSoft changes from one colour to the next
BurnishingA final layer pressed hard until no paper showsA smooth, shiny finish; glass and metal
Crisp edgesOutline just inside the line, then fillMandalas, tiles and colour by number

1. Control your pressure: the five-square warm-up

Pressure decides how much colour leaves the pencil. Caran d’Ache suggests a simple exercise in its guide to blending colours with coloured pencils: draw five squares and fill them with one pencil, pressing almost not at all in the first, then slightly, then medium, then firmer, and very hard in the last, without tearing the paper.

You don’t need to draw the squares. Print an easy quilt pattern and use a row of its blocks instead. Keep the sheet: it shows you, in your own pencils, how dark each one can go.

2. Layer from light to dark

Most smooth, rich colour comes from several light layers rather than one heavy one. Caran d’Ache describes laying down a light base layer, then working over it with darker or complementary colours, using the darker ones where you want shadow and the lighter ones where you want brightness.

  • Start every space with light pressure, so the paper still has room for more colour.
  • Put the lightest colour down first. A dark colour covers a light one; a light colour won’t hide a dark slip.
  • If you mix brands, the Artists Network guide to coloured pencils notes that layering a softer pencil over a harder one is easier than the reverse.

The speckled white dots you see after one layer are the grain of the paper showing through. More light layers fill them in.

3. Hatching, cross-hatching and flat shading

Faber-Castell’s basic colour pencil techniques explain that the angle of the pencil changes the mark: held steeply you get thin, precise lines; held flat you get broad ones.

  • Hatching: parallel lines in one direction. The closer the lines, the darker the area looks.
  • Cross-hatching: a second set of lines at another angle over the first, for denser shadow. It is forgiving, because it doesn’t have to be neat.
  • Flat shading: hold the pencil low so the side of the lead touches the paper, and colour in small, overlapping strokes. Faber-Castell recommends this for gradients, because you build the colour layer by layer and can adjust as you go.

For a gradient inside one shape, press harder at one end and ease off as you move across. Derwent’s project notes add a useful habit: when you change stroke direction, turn the paper rather than twisting your hand.

4. Blending and 5. burnishing

Blending softens the join between two colours. There are three easy ways, and none needs a solvent:

  1. With the pencils themselves. Overlap the two colours with light pressure where they meet, then go back over the join with the lighter one.
  2. With a white or pale pencil. The Artists Network guide describes blending with heavy, even pressure using a white or light-coloured pencil such as cream or light grey. It lightens the colours slightly.
  3. With a colourless blender pencil. Derwent explains in its guide to its colouring media that a blending pencil mixes colours, leaves a matt finish and still lets you add more colour on top.

Burnishing is pressing hard on the final layer until no paper shows, for a smooth, slightly shiny surface. Derwent notes that once an area is burnished, it is very hard to add more colour over it, so burnish last. The Artists Network guide suggests burnishing the light areas first. If a whitish haze appears on heavily coloured areas, that is wax bloom: it wipes off with a soft tissue.

6. Keep edges crisp

Clean edges make a page look finished more than anything else. Sharpen often for small spaces, trace just inside the printed line with light pressure, then fill the middle. Start at the top of the page and on the side away from your drawing hand, and rest your hand on a scrap of paper to avoid smudges. A blunt pencil is better for burnishing large areas; a sharp one for edges and detail.

How to make a stained glass page look like glass

Real stained glass is made of pieces of coloured glass held together by strips of lead, as the V&A explains in its introduction to stained glass; painters added details in a grey-black to brown glass paint. The Metropolitan Museum’s 1971 bulletin on stained-glass windows describes the lead lines as colour stops that keep each colour pure. That gives you the rules for a printed window:

  • One colour per pane, with the black lines left untouched as the lead.
  • Strong jewel colours. The Met’s family guide, Let’s Look at Stained Glass, notes that medieval blue was made with cobalt and deep red with copper. Deep blue and ruby red with touches of gold and green look right.
  • Light in the middle, darker at the edges. Shade each pane a little darker next to its lead line, lighter in the centre, as if light were coming through.
  • Burnish the panes for a glassy sheen once the colour is where you want it.

Begin with a simple rose window, which has the fewest panes, then move to a detailed gothic window.

Geometric patterns, mandalas and colour by number

Geometric pages are made for practising: pick three or four colours, give each shape type its own colour, and try a gradient across the page by shading each row a little darker. The hexagon mosaic works well for this.

Mandalas reward repetition: colour the same ring in the same colour all the way round before moving out, and use darker shades towards the centre or the edge. Try a medium mandala once you are comfortable with edges.

Colour by number gives you the colours, but you can still layer and shade inside each space. Our sunflower colour by number has large petals that suit a light-to-dark gradient, and our guide on how to do colour by number for adults covers the key and printing. For something quicker, the bold and easy pages have big spaces and thick lines.

What you need

  • A set of coloured pencils. Twenty-four colours is plenty to start; add a white pencil for blending.
  • A good sharpener and, if you like, a colourless blender pencil.
  • Paper. Our pages print on ordinary printer paper. Faber-Castell notes that smooth paper gives clean lines and even colour, while grained paper breaks up the stroke; if you plan many layers or heavy burnishing, print on thicker paper or card if your printer takes it.
  • The right size. Print at 100% or “Fit to page” on A4 or US Letter; our guide to printing colouring pages explains the settings.

All of these pages are free in our adult colouring pages collection. If you colour to unwind, our summary of the research on colouring for adults sets out what the studies found.

Free printables for this

Free to print at home or in class, with no sign-up. Each page has a US Letter and an A4 PDF.

Questions people ask

What is the easiest coloured pencil technique for beginners?

Layering with light pressure. Colour each space lightly, lightest colour first, and add more layers until the colour is as strong as you want. It is forgiving, needs no extra tools, and is the base for blending and burnishing later.

How do you blend coloured pencils without a blender?

Overlap the two colours lightly where they meet, then go over the join with the lighter colour, or with a white or pale pencil pressed firmly. A white pencil softens the join and lightens the colours a little.

What is burnishing with coloured pencils?

Burnishing is pressing hard on the final layer so the colour fills every speck of paper and turns smooth and slightly shiny. Do it last: once an area is burnished, it is very hard to add more colour on top.

Why do my coloured pencils look patchy?

The white specks are the grain of the paper showing through a light layer. Add more light layers, change the direction of your strokes, or finish with a blender or burnishing to fill the gaps.

Can I use these techniques on printer paper?

Yes. Ordinary printer paper takes several light layers and some blending. It holds fewer layers than drawing paper, so for heavy burnishing print on thicker paper or card if your printer allows it.

Sources

  1. Caran d’Ache: Techniques for blending colours using coloured pencils
  2. Faber-Castell: Basic techniques with Goldfaber colour pencils
  3. Derwent: Colouring media (burnisher and blender pencils)
  4. Artists Network: All-in-one guide to coloured pencils
  5. V&A: Stained glass, an introduction
  6. The Metropolitan Museum of Art: Let’s Look at Stained Glass (family guide)
  7. The Metropolitan Museum of Art Bulletin (1971–72): Stained-Glass Windows

We read every source on 17 November 2026 and link to it where we use it. Spotted a mistake? Email support@colouringnest.com and we’ll fix it.